教师名录
温海营,博士,硕士生导师,小米青年学者,5657威尼斯至善青年学者,学院教学研究主任。主要研究方向是仿生机器人、并联机构及控制、智能机器人。近五年主持国家自然科学基金青年基金、江苏省自然科学基金青年基金、企业技术开发项目等多项科研课题,并参与国家自然科学基金面上项目,863计划和省科技创新重大专项等项目,在IEEE TIE、IEEE TIM、FME等中科院TOP期刊及国内外学术期刊发表二十余篇论文,申请发明专利十余项。获得中国创造学会创造成果一等奖,辽宁省科技进步二等奖等奖项。
欢迎对机器人技术感兴趣的本科生、研究生加入课题组。
2016年-2018年,大连理工大学,控制科学与工程,博士后
2018年-至今,5657威尼斯,5657威尼斯,讲师,副教授
微机原理与应用(双语) The principles of the Micro-Computer with Applications
创造学与创造力开发
《IEEE Transactions on Industrial Electronics》
《IEEE/ASME Transactions on Mechatronics》
《Soft robotics》
《Frontiers of Mechanical Engineering》
《Journal of Intelligent Manufacturing》
《Interational Jouranl of Advanced Manufacturing Technology》
《Industrial Robot-An International Journal》
《机器人》
中国人工智能学会CAAI青工委委员
中国机械工程学会高级会员
IEEE International Conference on Mechatronics and Machine Vision in Practice出版主席
中创会创造成果一等奖(2/7)
辽宁省自然科学学术成果一等奖
辽宁省科技进步二等奖(8/9)
江苏省科技人才项目“科技副总”
小米青年学者
5657威尼斯至善青年学者
期刊:
[1] H. Wen, J. Zhu, H. Zhang, M. Dai, B. Li, Z. Zhang, W. Xu, M. Cong. Development of a masticatory robot using a novel cable-driven linear actuator with bidirectional motion, Frontiers of Mechanical Engineering-PRC., 2022, 17(4): 31 (SCI)
[2] S. Ji, Z. Zhang, Z. Xia, H. Wen*, J. Zhu, K. Zhao. RBHHM: A novel remote cardiac cycle detection model based on heartbeat harmonics, Biomedical Signal Processing and Control, 2022, 78: 103936 (SCI)
[3] H. Wen, M. Cong, W. Xu, Z. Zhang and M. Dai. Optimal design ofa linkage–cam mechanism-based redundantly actuated parallel manipulator [J]. Frontiers of Mechanical Engineering. 2021, 16 (3): 451-467 (SCI)
[4] K. Zhao, H. Wen, Z. Zhang, C. He, J. Wu. Fractal characteristics-based motor dyskinesia assessment. BIOMEDICAL SIGNAL PROCESSING AND CONTROL. 2021. (SCI)
[5] H. Wen, M. Cong, G. Wang, W. Qin, W. Xu and Z. Zhang, Dynamics and Optimized Torque Distribution Based Force/position Hybrid Control of a 4-DOF Redundantly Actuated Parallel Robot with Two Point-contact Constraints[J]. International Journal of Control, Automation and Systems, 2019, 17(5): 1293-1303. (SCI)
[6] H. Wen, W. Xu, M. Cong. Kinematic Model and Analysis of an Actuation Redundant Parallel Robot with Higher Kinematic Pairs for Jaw Movement[J]. IEEE Transactions on Industrial Electronics. 2015, 62(3): 1590-1598. (SCI)
[7] H. Wen,et al. Experimental Verification of Workspace and Mouth-opening Movement of a Redundantly Actuated Humanoid Chewing Robot[J]. Industrial robot: an international journal. 2015, 42(5):406-415. (SCI)
[8] Cong M.,Wen H., Du Y., Dai P., Coaxial Twin-shaft Magnetic Fluid Seals Applied in Wafer Handling Robot[J]. Chinese Journal of Mechanical Engineering, 2012, 25(4): 706-714. (SCI)
[9] 温海营,戴敏,张慧,等.含被动高副的冗余驱动并联机器人优化设计[J]. 机器人,2021
[10]温海营,丛明,王贵飞,等.冗余驱动仿下颌运动机器人工作空间分析及试验验证[J]. 机器人, 2015, 37(3): 286-297.
[11]温海营,任翔,徐卫良,等.咀嚼机器人颞下颌关节仿生设计与实验测试[J].吉林大学学报(工学版), 2019, 49(3): 943-952.
会议:
[1] Yijie Guo, Zijun Su, Haiying Wen*, et. al. Design of Elastic Joints for a Bionic Parallel Chewing Robot, IEEE 28th International Conference on Mechatronics and Machine Vision in Practice , Boston, USA, Nov. 16-18, 2022. (最佳论文奖)
[2] Bao Lin, Wen Haiying, Zhang Zhisheng, Dai Min. Analysis Of DynamicCharacteristics Of Suspension Structure Of Electric Hoist For Stage. 2021 4thInternational Conference on Mechatronics, Robotics and Automation, ICMRA.
[3] Yu Jiyong, Zhang Zhisheng, Wen Haiying*, et al. Design And Workspace Analysis Of A Higher Kinematic Pair Constrained Cable-Driven 6-UPS Bionic Parallel Chewing Robot. IEEE 27th International Conference on Mechatronics and Machine Vision in Practice, M2VIP 2021, Shanghai, Nov. 2021.
[4] WenYang, HaiyingWen, Zhisheng Zhang, Obstacle AvoidancePath Planning Of Manipulator Based On Improved RRT Algorithm. 2021 InternationalConference on Computer, Control and Robotics, ICCCR 2021,p 104-109,January 8,2021.
[5] Haiying Wen, Xiang Ren, Ming Cong, Weiliang Xu, Yi Liu. Force Analysis and Experiment of a Redundantly Actuated Chewing Robot. //IEEE 24rd International Conference on Mechatronics and Machine Vision in Practice (IEEE M2VIP 2017), Auckland, New Zealand, 21-23 Nov 2017.
[6] HaiyingWen, Ming Cong, Wenlong Qin, Weiliang Xu. Contact kinematics of spatial higher kinematic pairs of a masticatory robot. //IEEE 23rd International Conference on Mechatronics and Machine Vision in Practice (IEEE M2VIP 2016), Nanjing, 28-30 Nov. 2016.
[7] Haiying Wen, Ming Cong, Guifei Wang, Weiliang Xu. Mandibular Movement Experiment of a Masticatory Robot. //IEEE-Cyber 2015: The 5th International Conference on Cyber Technology in Automation, Control, and Intelligent Systems. Shenyang, Jun. 8-11, 2015.
[8] Xiang Ren, Haiying Wen, Guifei Wang, Shuhai Hu and Ming Cong. Trajectory Measurement of Human Mandible and Movement test of a Chewing Robot[C]. //Proceedings of the 2015 IEEE Conference on Robotics and Biomimetics (IEEE ROBIO2015), Zhuhai, China, December 6-9, 2015, pp. 37-41.
主持项目:
1、仿下颌机器人冗余驱动机理与力和位置柔顺控制方法研究,国家自然科学青年基金项目,25万,主持
2、基于大刚度双向绳驱动的刚柔耦合并联机器人设计理论,全国重点实验室开发课题,主持
3、无人挖掘机高效运动轨迹跟踪及智能控制技术研发,江苏省产业前瞻与关键核心技术重点项目,子课题
4、高副约束的绳驱动冗余仿生口颌机器人设计与控制方法研究,江苏省自然科学青年基金项目,20万,主持
5、数控机床关键零部件故障诊断与寿命预测技术,企业横向,300万,主持
6、冗余驱动仿生咀嚼机器人多目标驱动力优化与控制研究,中国博士后科学基金,主持
7、5657威尼斯至善青年学者支持计划,20万,主持
8、数控机床轴承故障预测工业APP,企业横向,60万,主持
9、硬度自动检测用协作机器人关键技术研发,企业横向,26.8万,主持
10、集成情景-程序性记忆认知特性的机器人经验学习与技能获取,国家自然科学基金面上项目,63万,参与
1.温海营; 戴敏; 张志胜; 林福金; 夏志杰; 一种低惯量高刚度绳索驱动直线运动装置, 2019-11-7, 中国, CN201911083684.5.
2.温海营,于继勇,张志胜,戴敏; 一种高副约束的绳驱动并联仿生口颌机器人, 2020-10-09, 中国, CN202011075158.7.
3.温海营,张志胜,戴敏,鲍琳; 一种4UPU-UP冗余驱动并联机器人, 2020-10-19,中国, CN202011121850.9.
4.温海营; 鲍琳; 张志胜; 戴敏; 张慧; 一种5UPS-2RP(U)冗余驱动并联机器人, 2020-12-22, 中国, CN202011532366.5.
5.丛明; 温海营; 王贵飞; 杜宇; 刘冬; 冗余驱动并联机构驱动力优化方法及轴组控制验证平台, 2016-04-06, 中国, CN201510925433.2.
6.丛明; 王贵飞; 温海营; 杜婧; 徐卫良; 一种具有仿生颞下颌关节的冗余驱动咀嚼机器人, 2015-6-10, 中国, CN201310602874.X.
温海营,博士,硕士生导师,小米青年学者,5657威尼斯至善青年学者,学院教学研究主任。主要研究方向是仿生机器人、并联机构及控制、智能机器人。近五年主持国家自然科学基金青年基金、江苏省自然科学基金青年基金、企业技术开发项目等多项科研课题,并参与国家自然科学基金面上项目,863计划和省科技创新重大专项等项目,在IEEE TIE、IEEE TIM、FME等中科院TOP期刊及国内外学术期刊发表二十余篇论文,申请发明专利十余项。获得中国创造学会创造成果一等奖,辽宁省科技进步二等奖等奖项。
欢迎对机器人技术感兴趣的本科生、研究生加入课题组。
期刊:
[1] H. Wen, J. Zhu, H. Zhang, M. Dai, B. Li, Z. Zhang, W. Xu, M. Cong. Development of a masticatory robot using a novel cable-driven linear actuator with bidirectional motion, Frontiers of Mechanical Engineering-PRC., 2022, 17(4): 31 (SCI)
[2] S. Ji, Z. Zhang, Z. Xia, H. Wen*, J. Zhu, K. Zhao. RBHHM: A novel remote cardiac cycle detection model based on heartbeat harmonics, Biomedical Signal Processing and Control, 2022, 78: 103936 (SCI)
[3] H. Wen, M. Cong, W. Xu, Z. Zhang and M. Dai. Optimal design ofa linkage–cam mechanism-based redundantly actuated parallel manipulator [J]. Frontiers of Mechanical Engineering. 2021, 16 (3): 451-467 (SCI)
[4] K. Zhao, H. Wen, Z. Zhang, C. He, J. Wu. Fractal characteristics-based motor dyskinesia assessment. BIOMEDICAL SIGNAL PROCESSING AND CONTROL. 2021. (SCI)
[5] H. Wen, M. Cong, G. Wang, W. Qin, W. Xu and Z. Zhang, Dynamics and Optimized Torque Distribution Based Force/position Hybrid Control of a 4-DOF Redundantly Actuated Parallel Robot with Two Point-contact Constraints[J]. International Journal of Control, Automation and Systems, 2019, 17(5): 1293-1303. (SCI)
[6] H. Wen, W. Xu, M. Cong. Kinematic Model and Analysis of an Actuation Redundant Parallel Robot with Higher Kinematic Pairs for Jaw Movement[J]. IEEE Transactions on Industrial Electronics. 2015, 62(3): 1590-1598. (SCI)
[7] H. Wen,et al. Experimental Verification of Workspace and Mouth-opening Movement of a Redundantly Actuated Humanoid Chewing Robot[J]. Industrial robot: an international journal. 2015, 42(5):406-415. (SCI)
[8] Cong M.,Wen H., Du Y., Dai P., Coaxial Twin-shaft Magnetic Fluid Seals Applied in Wafer Handling Robot[J]. Chinese Journal of Mechanical Engineering, 2012, 25(4): 706-714. (SCI)
[9] 温海营,戴敏,张慧,等.含被动高副的冗余驱动并联机器人优化设计[J]. 机器人,2021
[10]温海营,丛明,王贵飞,等.冗余驱动仿下颌运动机器人工作空间分析及试验验证[J]. 机器人, 2015, 37(3): 286-297.
[11]温海营,任翔,徐卫良,等.咀嚼机器人颞下颌关节仿生设计与实验测试[J].吉林大学学报(工学版), 2019, 49(3): 943-952.
会议:
[1] Yijie Guo, Zijun Su, Haiying Wen*, et. al. Design of Elastic Joints for a Bionic Parallel Chewing Robot, IEEE 28th International Conference on Mechatronics and Machine Vision in Practice , Boston, USA, Nov. 16-18, 2022. (最佳论文奖)
[2] Bao Lin, Wen Haiying, Zhang Zhisheng, Dai Min. Analysis Of DynamicCharacteristics Of Suspension Structure Of Electric Hoist For Stage. 2021 4thInternational Conference on Mechatronics, Robotics and Automation, ICMRA.
[3] Yu Jiyong, Zhang Zhisheng, Wen Haiying*, et al. Design And Workspace Analysis Of A Higher Kinematic Pair Constrained Cable-Driven 6-UPS Bionic Parallel Chewing Robot. IEEE 27th International Conference on Mechatronics and Machine Vision in Practice, M2VIP 2021, Shanghai, Nov. 2021.
[4] WenYang, HaiyingWen, Zhisheng Zhang, Obstacle AvoidancePath Planning Of Manipulator Based On Improved RRT Algorithm. 2021 InternationalConference on Computer, Control and Robotics, ICCCR 2021,p 104-109,January 8,2021.
[5] Haiying Wen, Xiang Ren, Ming Cong, Weiliang Xu, Yi Liu. Force Analysis and Experiment of a Redundantly Actuated Chewing Robot. //IEEE 24rd International Conference on Mechatronics and Machine Vision in Practice (IEEE M2VIP 2017), Auckland, New Zealand, 21-23 Nov 2017.
[6] HaiyingWen, Ming Cong, Wenlong Qin, Weiliang Xu. Contact kinematics of spatial higher kinematic pairs of a masticatory robot. //IEEE 23rd International Conference on Mechatronics and Machine Vision in Practice (IEEE M2VIP 2016), Nanjing, 28-30 Nov. 2016.
[7] Haiying Wen, Ming Cong, Guifei Wang, Weiliang Xu. Mandibular Movement Experiment of a Masticatory Robot. //IEEE-Cyber 2015: The 5th International Conference on Cyber Technology in Automation, Control, and Intelligent Systems. Shenyang, Jun. 8-11, 2015.
[8] Xiang Ren, Haiying Wen, Guifei Wang, Shuhai Hu and Ming Cong. Trajectory Measurement of Human Mandible and Movement test of a Chewing Robot[C]. //Proceedings of the 2015 IEEE Conference on Robotics and Biomimetics (IEEE ROBIO2015), Zhuhai, China, December 6-9, 2015, pp. 37-41.
中国人工智能学会CAAI青工委委员
中国机械工程学会高级会员
IEEE International Conference on Mechatronics and Machine Vision in Practice出版主席
主持项目:
1、仿下颌机器人冗余驱动机理与力和位置柔顺控制方法研究,国家自然科学青年基金项目,25万,主持
2、基于大刚度双向绳驱动的刚柔耦合并联机器人设计理论,全国重点实验室开发课题,主持
3、无人挖掘机高效运动轨迹跟踪及智能控制技术研发,江苏省产业前瞻与关键核心技术重点项目,子课题
4、高副约束的绳驱动冗余仿生口颌机器人设计与控制方法研究,江苏省自然科学青年基金项目,20万,主持
5、数控机床关键零部件故障诊断与寿命预测技术,企业横向,300万,主持
6、冗余驱动仿生咀嚼机器人多目标驱动力优化与控制研究,中国博士后科学基金,主持
7、5657威尼斯至善青年学者支持计划,20万,主持
8、数控机床轴承故障预测工业APP,企业横向,60万,主持
9、硬度自动检测用协作机器人关键技术研发,企业横向,26.8万,主持
10、集成情景-程序性记忆认知特性的机器人经验学习与技能获取,国家自然科学基金面上项目,63万,参与
1.温海营; 戴敏; 张志胜; 林福金; 夏志杰; 一种低惯量高刚度绳索驱动直线运动装置, 2019-11-7, 中国, CN201911083684.5.
2.温海营,于继勇,张志胜,戴敏; 一种高副约束的绳驱动并联仿生口颌机器人, 2020-10-09, 中国, CN202011075158.7.
3.温海营,张志胜,戴敏,鲍琳; 一种4UPU-UP冗余驱动并联机器人, 2020-10-19,中国, CN202011121850.9.
4.温海营; 鲍琳; 张志胜; 戴敏; 张慧; 一种5UPS-2RP(U)冗余驱动并联机器人, 2020-12-22, 中国, CN202011532366.5.
5.丛明; 温海营; 王贵飞; 杜宇; 刘冬; 冗余驱动并联机构驱动力优化方法及轴组控制验证平台, 2016-04-06, 中国, CN201510925433.2.
6.丛明; 王贵飞; 温海营; 杜婧; 徐卫良; 一种具有仿生颞下颌关节的冗余驱动咀嚼机器人, 2015-6-10, 中国, CN201310602874.X.